ZCM-180 Right Angle Hollow Rotary Table
The ZCM-180 right angle hollow rotary table is designed for servo-driven rotary positioning systems that require stronger torque output, compact motor arrangement, hollow platform routing, and stable indexing performance. Compared with ZCM-130, this model is better suited for higher load fixtures, automation equipment, inspection stations, and rotary positioning units where the motor must be arranged at a right angle to save installation space.
Request a Quote Back to ZCM Series
Key Features of ZCM-180
Right Angle Motor Layout
Places the motor on the side of the rotary table, helping equipment designers reduce axial installation length.
Higher Torque Capacity
Rated output torque reaches 470 N.m for L1 ratios and 315–470 N.m across L2 ratio options.
Hollow Output Platform
The hollow center supports cable, air pipe, shaft, and fixture routing through the rotary axis.
L1 / L2 Ratio Options
Supports multiple reduction ratios from 15 to 300 for different speed, torque, and positioning requirements.
Ordering Code Example
Example ordering code: ZCM-180-30-19-70-90-M6. Move your mouse over each code segment to see its meaning.
Frame Size
ZCM-180 is suitable for higher load right angle rotary positioning systems and servo-driven automation modules.
Ratio Selection
L1 ratios are suitable for higher efficiency and faster positioning. L2 ratios are used when higher torque output is required.
Motor Interface
Motor shaft diameter, pilot diameter, hole pitch, and screw size should be confirmed before ordering.
Selection Note
Confirm load weight, fixture inertia, required speed, ratio, motor model, and installation direction before final selection.
Technical Parameters
| Item | Unit | ZCM180-L1 | ZCM180-L2 |
|---|---|---|---|
| Bearing Structure | – | Cross roller bearing | |
| Reduction Ratio | i | 15 / 21 / 30 / 50 | 90 / 120 / 150 / 210 / 300 |
| Rated Output Torque | N.m | 470 / 315 | 470 |
| Maximum Output Torque | N.m | 3 Times Rated Torque | |
| Positioning Accuracy | arc-min | ≤1.5 | ≤3 |
| Repeated Positioning Accuracy | arc-sec | ≤30 | ≤60 |
| Allowable Disk Speed | rpm | 200 Intermittent Operation | |
| Adapt to Servo Motor | W | 750–1500 | |
| Suitable for Stepping Motor | – | 86 Stepper | |
| Allowable Axial Load | N | 13500 | |
| Allowable Radial Load | N | 13500 | |
| Design Load | kg | 230 | |
| Allowable Moment of Inertia | N.m | 110 | |
| Torsional Rigidity | N.m/arcmin | 45 | |
| Overturning Moment | N.m | 1420 | |
| Accuracy Life | h | 20000h Intermittent Operation | |
| Protection Level | IP | 65 | |
| Lubrication Method | – | Long-term lubrication | |
| Installation Method | – | Arbitrary | |
| Concentricity of Rotating Platform | mm | ≤0.01 | |
| Parallelism of Rotating Platform | mm | ≤0.01 | |
| Transmission Efficiency | % | 95 | 90 |
| Noise | dB | ≤63 | ≤63 |
| Weight | kg | 17 | 19 |
Outline Dimensional Drawing
Select the L1 or L2 configuration below to review the corresponding outline drawing for motor interface, mounting size, rotary platform layout, and installation reference.
Typical Applications
Automation Equipment
Used in servo-driven assembly stations, rotary fixture units, and automated indexing systems that need compact right angle motor placement.
View Automation
Inspection Fixtures
Suitable for inspection platforms, vision systems, and measurement fixtures requiring controlled rotary positioning under stronger load conditions.
View Applications
Packaging Machinery
Applied in rotary feeding, labeling, indexing, and synchronized packaging motion systems with limited installation space.
View PackagingRelated Products
ZCM-130 Rotary Table
Lower frame option for compact right angle rotary positioning systems and lighter automation equipment.
View ZCM-130
ZCM-260 Rotary Table
Higher capacity hollow rotary platform, larger rotary platforms, and stronger servo-driven positioning applications.
View ZCM-260
Hollow Rotary Table
Return to the main hollow rotary table category to compare ZBT, ZCTK, ZCTR, ZCH, and ZCM series options.
View CategoryNeed Help Selecting ZCM-180?
Send your motor model, fixture size, load weight, ratio requirement, installation direction, and accuracy requirement. Our team can help confirm whether ZCM-180 is suitable for your right angle rotary positioning system.
Contact Us